Veritas Volume Replicator 的安装
主备节点硬件和软件配置和版本如下：
主节点 机器名：lxsfrac01
Sun Microsystems Sun Fire X4100 Server
操作系统 solaris10u4 x86_64
VVR版本: Veritas Volume Replicator 5.0 GA
Oracle 版本： Oracle 10gR2 Enterprise Edition
磁盘阵列：SAN/ HDS AMS 1000
Public网卡：e1000g0 私有(复制)网卡：e1000g1
备用节点机器名：lxsfrac02
软硬件环境与主节点相同

两个节点分别安装VVR和vxfs，安装方法相同，以lxsfrac02为例：

放入安装介质，一般Solaris都由vold进程自动mount CD，
如果需要手工mount：mount –F hsfs –o ro /dev/dsk/c0t6d0s2 /cdrom

root@lxsfrac02 # cd ./volume_replicator/
root@lxsfrac02 # ls
copyright docs installvvr pkgs release_notes scripts tools uninstallvvr
root@lxsfrac02 # ls -l
total 24
-rw-r--r-- 1 root root 476 Dec 15 2006 copyright
drwxrwxr-x 2 root root 512 Jun 21 10:13 docs
-rwxr-xr-x 1 root root 2283 Apr 14 2007 installvvr
drwxrwxr-x 3 root root 1024 Jun 21 10:13 pkgs
drwxrwxr-x 2 root root 512 Jun 21 10:13 release_notes
drwxrwxr-x 3 root root 512 Jun 21 10:13 scripts
drwxrwxr-x 3 root root 512 Jun 21 10:13 tools
-rwxr-xr-x 1 root root 2283 Apr 14 2007 uninstallvvr
root@lxsfrac02 # ./installvvr lxsfrac02

Veritas Volume Replicator 5.0 Installation Program

Copyright (c) 2007 Symantec Corporation. All rights reserved. Symantec, the Symantec Logo are trademarks or registered trademarks of Symantec Corporation or its affiliates in the U.S. and other countries. Other names may be trademarks of their respective owners.

The Licensed Software and Documentation are deemed to be "commercial computer software" and "commercial computer software documentation" as defined in FAR Sections 12.212 and DFARS Section 227.7202.

Logs for installvvr are being created in /var/tmp/installvvr-mrk46Y.

Initial system check:

Checking VVR installation on lxsfrac02 ............................................ not installed
Checking architecture on lxsfrac02 ................................................ i386

Veritas Volume Replicator 5.0 Installation Program

Checking system licensing

Installing licensing packages
VVR is not licensed on lxsfrac02

Enter a VVR license key for lxsfrac02: ******************
****************** successfully registered on lxsfrac02
Permanent VVR license registered on lxsfrac02
Do you want to enter another license key for lxsfrac02? [y,n,q] (n)

Veritas Volume Replicator 5.0 Installation Program

Checking installed packages on lxsfrac02

Veritas Volume Replicator 5.0 Installation Program
VVR can be installed without optional packages to conserve disk space.
Additional packages are typically installed to simplify future upgrades.

1) Required Veritas Volume Replicator packages - 855 MB required
2) All Veritas Volume Replicator packages - 861 MB required
3) Storage Foundation Enterprise packages - 911 MB required

Select the packages to be installed on all systems? [1-3,q,?] (3) 2

Veritas Volume Replicator 5.0 Installation Program

The following VVR packages will be installed:
VRTSperl Veritas Perl 5.8.8 Redistribution
VRTSvlic Veritas Licensing
VRTSicsco Symantec Common Infrastructure
VRTSpbx Symantec Private Branch Exchange
VRTSsmf Symantec Service Management Framework
VRTSat Symantec Product Authentication Service
VRTSobc33 Veritas Enterprise Administrator Core Service
VRTSob Veritas Enterprise Administrator Service
VRTSobgui Veritas Enterprise Administrator
VRTSccg Veritas Enterprise Administrator Central Control Grid
VRTSmh Veritas Storage Foundation Managed Host by Symantec
VRTSaa Veritas Enterprise Administrator Action Agent
VRTSspt Veritas Software Support Tools
SYMClma Symantec License Inventory Agent
VRTSvxvm Veritas Volume Manager Binaries
VRTSdsa Veritas Datacenter Storage Agent
VRTSfspro Veritas File System Management Services Provider
VRTSvmman Veritas Volume Manager Manual Pages
VRTSvmdoc Veritas Volume Manager Documentation

Press [Return] to continue:
...continued:
VRTSdcli Veritas Distributed Command Line Interface
VRTSalloc Veritas Volume Manager Intelligent Storage Provisioning
VRTSvmpro Veritas Volume Manager Management Services Provider
VRTSddlpr Veritas Device Discovery Layer Services Provider
VRTSvrpro Veritas Volume Replicator Client Extension and Provider for
Veritas Enterprise Administrator
VRTSvcsvr Veritas Cluster Server Agents for VVR
VRTSjre Veritas Java Runtime Environment Redistribution
VRTSjre15 Veritas Java Runtime Environment Redistribution
VRTSweb Veritas Java Web Server
VRTSvrw Veritas Volume Replicator Web Console
VRTSvrdoc Veritas Volume Replicator Documentation

Press [Return] to continue:
Checking for any AP driver issues on lxsfrac02 ................................... None
A copy of a previous VxVM configuration is present on the system lxsfrac02.
Do you want to restore and reuse the previous VxVM configuration of system lxsfrac02 [y,n,q,?] (y) n

Veritas Volume Replicator 5.0 Installation Program
Installing VVR: 100% ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■

Installation completed successfully on all systems
It is optional to configure VVR now. If you choose to configure VVR later, you can either do so manually, or run the installvvr -configure command. The product installation scripts can be found in /opt/VRTS/install directory

Are you ready to configure VVR? [y,n,q] (y)

The enclosure-based naming scheme is a feature of Veritas Volume Manager. It allows one to reference disks using a symbolic name that is more meaningful than the operating system's normal device access name. This symbolic name is typically derived from the array name.

Do you want to set up the enclosure-based naming scheme? [y,n,q,?] (n) y

Veritas Volume Replicator 5.0 Installation Program
Veritas Volume Manager default disk group name configuration:
Many Veritas Volume Manager commands affect the contents or configuration of a disk group. Such commands require that the user specify a disk group. This is accomplished by using the -g option of a command or setting the VXVM_DEFAULTDG environment variable. An alternative to these two methods for some commands is to configure the name of the default disk group of a system.

Note: The default disk group feature is not available with the DCLI vxadm(1M) and vxquery(1M) commands. When using these commands, a required disk group must be explicitly identified using the -g option.

Do you want to set up a default disk group for each system? [y,n,q,?] (y) n

Veritas Volume Replicator 5.0 Installation Program
Following are the default ports that will be used by VVR on lxsfrac02 :

Port for VVR heartbeat communication: 4145
Port for vradmind daemon: 8199
Port for vxrsyncd daemon: 8989
Ports for data replication: Anonymous-Ports

The ports indicated for VVR heartbeats and vradmind are IANA assigned.

The port settings should be identical for systems that will be part of the same Replicated Data Set. They should also be identical for all the systems in a cluster.

Do you want to change any of the VVR ports on lxsfrac02? [y,n,q] (n)

Veritas Volume Replicator 5.0 Installation Program

VVR Statistics Collection Tool

The VVR administrative daemon vradmind can collect and maintain various
statistics which are helpful in solving VVR performance issues. This
collection can be tuned using a few tunables like the frequency for
gathering the statistics and the number of days for which the collected
statistics should be preserved, after which the earlier statistics are
automatically deleted.


The frequency of VVR statistics collection on lxsfrac02 is set to per 10 seconds.

Do you want to change the frequency of VVR statistics collection on lxsfrac02 ? [y,n,q] (n)

The maximum number of days for which VVR statistics can be retained is set to 3 on lxsfrac02

Do you want to change the maximum number of days for retaining VVR statistics on lxsfrac02 ? [y,n,q] (n)


Veritas Volume Replicator 5.0 Installation Program

Configuration of VVR tunables (For the advanced user)

Do you want to view or modify VVR tunables on lxsfrac02 ? [y,n,q,?] (n)


Veritas Volume Replicator 5.0 Installation Program
Verify the install systems Fully Qualified Hostnames.

Querying fully qualified domain name of host "lxsfrac02" ............................. fail

Press [Return] to continue:
Unable to find FQHN for lxsfrac02!

Enter the fully qualified hostname of "lxsfrac02" or 'QUIT' to quit install.
Enter the fully qualified host name: lxsfrac02

Veritas Volume Replicator 5.0 Installation Program

Choose how this install will be managed.

This product can configured one of the two following ways:

* Storage Foundation Management Server managed host (Recommended)

* Standalone host


Pre-requisites for Storage Foundation Management Server managed host:
* A Storage Foundation Management Server (SFMS) is configured
* SFMS should be currently running and fully operational.
* Authentication Broker that is used by SFMS should be running.

The following information would be requested during configuration:
* The host name of the SFMS
* Previously set SFMS agent account password

There are no pre-requisites for deploying as a standalone host.

Enabling Storage Foundation Management Server management simplifies and improves management of the complex data center
resources, reducing planned and unplanned down time.

Enable Storage Foundation Management Server Management? [y,n,q] (y) n

Veritas Volume Replicator 5.0 Installation Program
Verify the install systems Fully Qualified Hostnames.
Configuring VEA in STANDALONE mode on "lxsfrac02" ..................................... ok

Configuring gridnode on "lxsfrac02" ................................................... ok
Registering gridnode on "lxsfrac02" ................................................... ok
Configuring actionagent on "lxsfrac02" ................................................ ok
Registering actionagent on "lxsfrac02" ................................................ ok
Registering StorageAgent on "lxsfrac02" ............................................... ok
Do you want to start Veritas Volume Replicator processes now? [y,n,q] (y)


Veritas Volume Replicator 5.0 Installation Program
Starting VVR: 100% ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
Startup completed successfully on all systems
You declined to set up the name of the default disk group for lxsfrac02.
Installation log files, summary file, and response file are saved at:
/opt/VRTS/install/logs/installvvr-mrk46Y

To enable Dynamic Multi-Pathing (DMP), MPxIO must be disabled. Refer to the Storage Foundation Release Notes for further details on disabling MPxIO.

检查vradmin deamon：

root@lxsfrac02 # ps -ef|grep vrad|grep -v grep
root 9808 1 0 16:24:47 ? 0:00 /usr/sbin/vradmind

安装Veritas File System：安装过程略

root@lxsfrac02 # cd file_system/
root@lxsfrac02 # ls -l
total 22
-rw-r--r-- 1 root root 476 Dec 15 2006 copyright
drwxrwxr-x 2 root root 512 Jun 21 10:12 docs
-rwxr-xr-x 1 root root 2283 Apr 14 2007 installfs
drwxrwxr-x 3 root root 1024 Jun 21 10:12 pkgs
drwxrwxr-x 2 root root 512 Jun 21 10:12 release_notes
drwxrwxr-x 3 root root 512 Jun 21 10:12 scripts
-rwxr-xr-x 1 root root 2283 Apr 14 2007 uninstallfs
root@lxsfrac02 # ./installfs lxsfrac02